King Air Pneumatics Quiz

Quiz Summary

0 of 6 Questions completed

Questions:

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 6 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 6

1. Question
What creates the vacuum (suction) in the pneumatic system?
- An electric-driven suction pump
- P3 pressure regulated air through an ejector with a venturi creating the suction.
- P3 non-pressure regulated air through an ejector with a venturi creating the suction.
- A vacuum pump connected to each side of the engine bleed air valves, before reaching the pneumatic 18 psi pressure regulator
Correct

Incorrect
Question 2 of 6

2. Question
What is true regarding the Pneumatic System?
- The pneumatic pressure regulator have a relief valve that opens at 21 psi
- The vacuum ejector uses un-regulated pneumatic air
- The pneumatic pressure system rely on both engines bleed air supply
- The door seal uses 18 psi regulated pneumatic air
Correct

Incorrect
Question 3 of 6

3. Question
The pneumatic air used for the door seal is regulated to:
- 18 psi
- 12 psi
- 4 psi
- 2 psi
Correct

Incorrect
Question 4 of 6

4. Question
The pneumatic air used for the door seal is regulated to:
- 18 psi
- 12 psi
- 4 psi
- 2 psi
Correct

Incorrect
Question 5 of 6

5. Question
What is true regarding the Bleed Air warning system?
- A pressure sensor located in the left centerwing section will trigger the Master Warning and "BLEED FAIL" when it senses a pressure drop of 2 psi of the bleed air line
- A pressure sensor for each side will trigger the Master Warning "BLEED FAIL" when the pressure of the EVA tube drops 2 psi.
- The warning annunsiator will extinguish when the affected side bleed air valve is completely closed
- The warning system consists of a gas filled tube, a responder unit with a diapragm. A microswitch will trigger the warning when the gas expands due to heat, pushing the diaphragm against the switch
Correct

Incorrect
Question 6 of 6

6. Question
What is true regarding the Bleed Air warning system?
- A pressure sensor located in the left centerwing section will trigger the Master Warning and "BLEED FAIL" when it senses a pressure drop of 2 psi of the bleed air line
- A pressure sensor for each side will trigger the Master Warning "BLEED FAIL" when the pressure of the EVA tube drops 2 psi.
- The warning annunsiator will extinguish when the affected side bleed air valve is completely closed
- The warning system consists of a gas filled tube, a responder unit with a diapragm. A microswitch will trigger the warning when the gas expands due to heat, pushing the diaphragm against the switch
Correct

Incorrect

King Air Pneumatics Quiz

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question